2S (2-Cell), DUAL BALANCE Charge Lead – XT90 (charger) to 5mm Bullet x 2 (battery)

Description

Our NEW 2S DUAL BALANCE CHARGE LEAD allows you to balance charge 2 x 2S batteries, at the same time, off of one channel of your charger.

More Power to the People…

FEATURES:

• NEW and IMPROVED in all areas, making these the most professional grade charge leads on the market!
• Hand-Built in the USA!  (with parts sourced from the U.S. and China)
  
• NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress points!
• NEW PRO SERIES printed shrink tubing!
• Inline connectors on battery end, for easier removal from the battery!
• BUILT TO LAST with the highest quality materials and craftsmanship throughout!
  
• All of our charge leads come with a female JST XH balance tap plug on the charger end and either a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery end.
• JST XH balance ports are found on nearly all popular chargers.
• This charge lead works with any brand 2S (2-Cell) LiPo/LiHV battery pack and charger combo using an XT90 connector and JST XH balance tap (charger end) + 5mm Bullet and 2mm balance tap (battery end).
  
• Built with high-amp 12awg, 1200 strand wire.
  
• 24 inches (61 cm) long.

HOW TO USE:

1. Plug XT90 connector (charger end of the harness) into the XT90 output plug of the charger.
2. Plug female JST XH balance connector (charger end of the harness) into balance port of charger (see your charger manual for details).
3. BATTERY 1 – Plug your 5mm Bullet connectors (both with white inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
4. BATTERY 1 – Plug your 2mm Bullet balance connector (with white shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
5. BATTERY 2 – Plug your 5mm Bullet connectors (both with black inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
6. BATTERY 2 – Plug your 2mm Bullet balance connector (with black shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
7. Charge batteries as you normally do.

WARNING: Never plug the charge lead into the battery first.  Doing this can cause a fire, explosion, permanent damage to the battery and/or charger, serious injury or death and damage to property if the connectors on the charger end are shorted together and/or allowed to touch another conductive surface.  Use with adult supervision only.

WARNING: Pay close attention to the polarity of ALL connections.  Reversing polarity can cause a fire, explosion, permanent damage to the battery and/or charger, serious injury or death and damage to property.  Use with adult supervision only.

WARNING: DO NOT cross Battery 1 and Battery 2 wires.  Crossing wires can cause a fire, explosion, permanent damage to the battery and/or charger, serious injury or death and damage to property.  Use with adult supervision only.

Also available for 4mm bullet (charger side) chargers here, and XT60 (charger side) chargers here